Skip to main content

REE Medical

Blog, VA Ratings

VA Range of Motion Chart

Share This Post

Understanding the VA Range of Motion Chart.

VA Range of Motion Chart: Reference Degrees and Functional Loss 

A VA range of motion chart lists reference degrees for normal joint movement, but it does not set a disability rating. Three terms are easy to confuse: reference degrees for normal motion, actual clinical measurements taken from a person, and the rating criteria in the VA’s schedule. Reference degrees appear in 38 CFR 4.71, and rating criteria for the spine and joints appear in 38 CFR 4.71a. A measurement taken at an exam is a separate record of the individual, and a chart alone does not determine compensation. 

The measurement itself happens at the appointment. At a range of motion VA C&P exam, a clinician measures how far a joint moves. The VA’s rules also direct attention to pain, repetitive use, flare-ups, and functional loss. Pain onset and the rated endpoint are different facts, and nothing in this article suggests that examiners omit findings. 

Background on what determines a VA rating places these measurements within the larger evaluation process. The sections below explain what charts and clinical measurements record, how reference degrees differ from rating thresholds, how a downloaded chart can be evaluated, how pain and repetition fit in, and what a final exam report typically contains. 

TL;DR: The Short Version 

  • Reference charts show normal motion, while the rating criteria in 38 CFR 4.71a set thresholds. The two are not the same, and no universal formula subtracts measured motion from normal motion. 
  • Normal-motion plates in 38 CFR 4.71 are reference illustrations, not a single measurement taken at rest. 
  • The VA’s Back DBQ separates observed repetitions from estimates of repeated-use and flare effects. 
  • Pain, weakness, fatigability, and incoordination form part of the functional picture. A resource on why medical evidence matters describes how such findings enter the record. 
  • A final exam report records the findings the examiner documented. Under 38 CFR 4.2, rating specialists interpret reports in light of the whole recorded history, and a missing field needs context and does not by itself show an error. 
Realistic photo of a Veteran seated across from a clinician in a physician’s office.

What Reference Charts and Clinical Measurements Record 

A VA range of motion chart is built to show how far a healthy joint is expected to move in each direction. Movements have names. Flexion bends a joint, extension straightens it, abduction moves a limb away from the body, and rotation turns it around its axis. The reference values for these movements are published in 38 CFR 4.71, which contains plates illustrating normal motion for the major joints. 

A clinical measurement is different. A clinician uses a goniometer, an instrument that works like an adjustable protractor, to read a joint angle. 38 CFR 4.46 addresses accurate measurement of joint excursion in VA examinations. The resulting number describes one person at one moment and is recorded in the exam report. 

Rating thresholds come from the diagnostic code that applies to the condition. They are found in 38 CFR 4.71a, and they differ by joint, by movement, and sometimes by whether the affected limb is dominant. Background on how VA disability ratings work describes how the schedule translates findings into percentages. 

No universal calculation subtracts measured motion from normal motion to produce a rating. A shoulder that reaches 120 degrees is not rated by comparing 120 to 180. The applicable code names specific thresholds, and the VA applies that code to the full record. Normal-motion plates are also not a single reading taken at rest, since they illustrate expected ranges. 

Examination findings document the person. The rating schedule documents the thresholds. The VA’s rating specialists connect the two, and the rating is a decision made on the evidence. Each of the three terms, reference degree, clinical measurement, and rating threshold, answers a different question. 

A few terms recur in exam reports. Active motion is movement the person performs, and passive motion is movement an examiner performs on a relaxed joint. Endpoints describe where movement stops, and the point where pain begins is recorded separately. A report that distinguishes these pieces gives the VA a more complete picture than a single number. 

Simple labeled illustration of a goniometer measuring shoulder flexion, neutral clinical style.

Reading the Degrees Joint by Joint 

A shoulder range of motion chart lists flexion and abduction together because both movements are measured from the side of the body. The table below lists reference values only. These are normal ranges. They are not rating thresholds and not promised ratings, and the rating criteria in 38 CFR 4.71a apply separately. 

Reference movement Normal reference (not a rating threshold) Source 
Shoulder flexion / abduction (shoulder range of motion degrees) 0–180 degrees each Plate I 
Thoracolumbar forward flexion 0–90 degrees Spine notes 
Thoracolumbar extension, lateral flexion, rotation 0–30 degrees each Spine notes 
Hip flexion / abduction 0–125 / 0–45 degrees Plate II 
Knee flexion / extension 0–140 degrees flexion; 0 extension Plate II 
Ankle dorsiflexion / plantar flexion 0–20 / 0–45 degrees Plate II 

For the shoulder, readers often search for a VA shoulder range of motion chart or for 38 CFR shoulder range of motion references. The regulation’s Plate I lists flexion and abduction at 0 to 180 degrees. The applicable movement, the diagnostic code, and whether the affected arm is dominant can all matter to the rating criteria, and the current schedule in 38 CFR 4.71a is the source for thresholds. 

A VA back range of motion chart shows forward flexion at 0 to 90 degrees, and extension, lateral flexion, and rotation at 0 to 30 degrees each. Back range of motion degrees in the Back DBQ follow those same reference endpoints, as the VA’s Back DBQ labels them. 

The VA hip range of motion chart in the regulation’s plates lists flexion and abduction, and other movements, such as rotation, are measured separately. A VA range of motion chart for the ankle lists dorsiflexion and plantar flexion. Both joints have more than one measurable movement, and a chart showing only one direction describes only part of a joint’s function. 

Knee measurements are often discussed in terms of a VA knee rating chart or a VA knee flexion rating chart. The reference values are normal flexion to 140 degrees and extension to 0. The thresholds that apply to a rating come from the knee diagnostic codes in 38 CFR 4.71a. Flexion and extension are rated under separate criteria, so each is read separately. 

Combined ratings add one more layer. When a Veteran has more than one service-connected disability, the VA does not add the percentages directly. According to the VA’s disability rating guidance, combined ratings follow a specific method, and the result rounds to the nearest ten. Rounding is to the nearest ten and is not always downward. 

Evaluating a Downloaded ROM Chart 

Many people encounter a VA range of motion chart PDF through a search engine. Free charts are common, and not every free PDF is inaccurate. A downloaded chart can be compared against four reference points: 

  1. A named source, such as the regulation itself or a VA publication. 
  1. A revision date, since the schedule changes over time. 
  1. The correct joint and movement for the condition at issue. 
  1. A clear distinction between normal reference values and current rating criteria. 

The regulatory text in 38 CFR 4.71 and 38 CFR 4.71a is the primary source against which a chart can be compared. A VA range of motion chart that cannot be traced to those sources is harder to verify. 

One common failure is a chart that shows only one direction of motion. A VA range of motion chart for the hip might list flexion and omit abduction and rotation, which leaves out movements the evaluation examines. Another failure is a chart that mixes normal values with rating percentages, which can suggest that a measurement maps directly onto a rating. A missing revision date is a third. 

When a chart conflicts with the regulation, the regulation controls. A chart is a convenience, and it is only as reliable as its source. 

Close-up of a hand circling a missing revision date on a printed range of motion assessment form.

The Movement That Happens After the Measurement 

A single reading captures one moment. The VA’s rules recognize that joints behave differently with use. 38 CFR 4.40 addresses functional loss due to pain, weakness, fatigability, and incoordination. 38 CFR 4.45 lists factors of joint disability, such as less movement than normal, weakened movement, excess fatigability, incoordination, and pain on movement. 38 CFR 4.59 addresses painful motion. 

Pain is not automatically equivalent to additional loss of motion or to a particular rating. The VA’s Back DBQ asks the clinician to note whether pain contributes to functional loss and to describe the extent. The form separates three situations: 

  • Observed repetitive use. Objective findings after repetitions of range of motion testing. 
  • Repeated use over time. An estimate of function after repeated use, based on the examination, the history, and the available evidence. 
  • Flare-ups. An estimate of function during flares, even when none is observed at the exam. 

When an examiner determines that an estimate is not feasible, the form expects an explanation. Estimates come from a clinician reviewing the available history and evidence, and the form does not call for guessed degree figures from anyone else. 

Hypothetical shoulder repetition example, illustrative only: at a range of motion VA C&P exam, a Veteran raises an arm overhead cleanly on the first attempt. The exam measurement captures that single overhead reading. Over repeated reaches, such as stocking shelves, the fourth or fifth reach might stall because of pain or fatigue. A single reading and a pattern of repeated use describe different things, which is why the DBQ has separate sections for each. Background on how the VA rates shoulder pain discusses these conditions in more depth. 

Situation What the Back DBQ asks 
Initial measurement Range of motion endpoints, and which movements exhibited pain 
After repetitions Whether additional loss of function or motion occurs, and which factors cause it 
Repeated use over time An estimate of motion after repeated use, based on the available evidence 
Flare-ups Whether a flare is present, and an estimate of function during flares 

The form does not require a flare to be present at the exam, and the estimate for flares draws on the history and the evidence. Nothing in this article suggests inducing a flare or changing treatment for an exam. 

How Measurements Are Taken at the Exam 

At a range of motion VA C&P exam for the back, the clinician typically measures forward flexion, extension, lateral flexion, and rotation, notes where pain appears, and may repeat movements. The VA’s claim exam guidance describes the exam as a way to collect information the VA needs to decide a claim. A measurement taken at an exam describes the joint at that moment, and the VA reviews it with the other evidence in the file. 

Clean infographic of a sample C&P exam report page with four highlighted data fields.

Records Around the Measurement 

The Back DBQ records the Veteran’s description of flare-ups, including frequency, duration, severity, and functional impairment, so the form itself collects that information in the clinician’s words. The VA’s claim exam guidance describes the exam as one source of information among the records in the file. 

A back example shows why pain onset and the measured endpoint differ. A VA range of motion chart for the back shows only where motion should end. A Veteran’s own description records where pain begins. A pain onset partway through forward flexion is one fact, and the endpoint reached is another. The Back DBQ asks about both, including whether any limitation of motion is attributable to pain, weakness, fatigability, or incoordination. Background on VA ratings for back pain describes the condition’s rating context. 

Per the VA’s exam guidance, new non-VA medical records are submitted to the VA directly. Records carried to an appointment are not thereby submitted to the claim, and an examiner cannot submit them for a claimant. 

Reading the Final Examination Report 

According to the VA, a copy of the final exam report can be requested through a Freedom of Information Act or Privacy Act request on VA Form 20-10206. A report on a joint may record the measurements, the pain findings, and the repetition and flare discussion. A resource on how a DBQ is structured shows the layout of those sections. 

Under 38 CFR 4.2, rating specialists interpret examination reports in light of the whole recorded history. The regulation notes that different examiners at different times will not describe the same disability in the same language, and a report with insufficient detail can be returned as inadequate for evaluation. A missing field therefore needs context. It does not prove the rating is wrong. 

A report on a joint may contain: 

  • The measurements recorded for each movement 
  • Where pain was noted 
  • Whether repetition was tested, and the result 
  • The flare-up and repeated-use discussion 

Frequently Asked Questions 

Can range of motion be measured at home? 

Home degree measurements are not a substitute for a clinical assessment. 38 CFR 4.46 addresses accurate measurement in VA examinations, and technique and interpretation belong with a qualified clinician.  

Does an exam have to occur during a flare-up? 

No. The Back DBQ asks whether the Veteran is being examined during a flare-up and allows an estimate of function during flares when none is present. The form looks to truthful frequency, duration, severity, and functional effects, with clinician estimates where the evidence supports them. Inducing a flare or changing treatment for an exam is not suggested. 

What happens if exam numbers seem inconsistent with the record? 

According to 38 CFR 4.2, rating specialists interpret examination reports in light of the whole recorded history, and a report that does not contain sufficient detail can be returned as inadequate for evaluation purposes. The VA’s claim exam guidance describes the exam as a way to collect information the VA needs to decide a claim. An outside measurement does not automatically overrule a VA finding, and the VA’s decision depends on the specific facts and evidence in each case. 

An image illustrating the REE Medical process -- 1) consultation 2) records review 3) independent medical evaluation and 4) medical documentation

Independent Documentation of Functional Limitations 

REE Medical coordinates independent medical evaluations and DBQs completed by licensed healthcare professionals, as described in its services overview. DBQs record clinical findings in a standardized format, including range of motion measurements and functional limitations. 

REE Medical partners with independent, trusted organizations that can provide additional specialized documentation if needed. An independent evaluation does not replace a VA exam the VA requests, and the VA alone decides claims. REE Medical does not prepare, present, or submit VA disability claims and does not provide legal or representational services. 

Veterans can learn more about how independent medical documentation is coordinated by contacting REE Medical for a complimentary, informational consultation. 

Final Thoughts 

A VA range of motion chart is a reference, not a rating. The rating schedule in 38 CFR 4.71a sets thresholds, and 38 CFR 4.40 recognizes that function is more than a single number. 

Pain, repeated use, and flare-ups are part of the functional picture the VA’s rules and forms describe, and the Back DBQ separates observed findings from clinician estimates. The VA’s decision depends on the specific facts and evidence in each case. 

Disclosure 

DISCLAIMER: REE Medical, LLC is not a Veterans Service Organization (VSO) or a law firm and is not affiliated with the U.S. Veterans Administration (“VA”). Results are not guaranteed, and REE Medical, LLC makes no promises. REE Medical’s staff does not provide medical advice or legal advice, and REE Medical is not a law firm. Any information discussed, such as, but not limited to, the likely chance of an increase or service connection, estimated benefit amounts, and potential new ratings, is solely based on past client generalizations and not specific to any one patient. The doctor has the right to reject and/or refuse to complete a Veteran’s Disability Benefit Questionnaire if they feel the Veteran is not being truthful. The Veteran’s Administration is the only agency that can make a determination regarding whether or not a Veteran will receive an increase in their service-connected disabilities or make a decision on whether or not a disability will be considered service-connected. This business is not sponsored by, or affiliated with, the United States Department of Veterans Affairs, any State Department of Military and Veterans Affairs, or any other federally chartered Veterans service organization. 

Accurate VA Disability Documentation

Struggling with your VA rating? We connect you with independent, licensed physicians who document service-connected disabilities for your VA claim. Free consultation – no hidden fees or obligations.

About REE Medical

REE Medical coordinates VA-compliant medical documentation through the nation’s largest network of DBQ doctors. We’ve helped secure clear disability ratings and VA compensation for veterans nationwide.

100,000+

Veterans Supported

800+

Largest Network of DBQ Doctors

95%

Report 70%+ VA Ratings

Google Review Badge

REE MEDICAL BLOG

VA Disability Resources and Guidance

Learn how the VA evaluates service-connected conditions, calculates combined disability ratings, and determines monthly compensation. Expert guidance for veterans navigating the VA disability benefits system.

VA Range of Motion Chart: Reference Degrees and Functional Loss A VA range of motion chart lists reference degrees for normal joint movement, but it does not set a disability rating. Three terms are easy

Sleep Apnea and Military Service: Evidence the VA Reviews A late sleep apnea diagnosis does not rule out service connection. Under 38 CFR 3.303, the question is whether the evidence as a whole establishes a

How Much Weight Does a C&P Exam Have? Understanding the Evidence How much weight does a C&P exam have? It depends on the rest of the record. The VA describes no fixed percentage, and the

VA Benefits Calculator

See how much more you could receive with a higher rating. Our calculator shows monthly compensation amounts at each rating level from 0% to 100%. Discover what you’re entitled to and take the next step in your VA claims journey.